Materials and Specification Our floor graphics are digitally printed onto self adhesive vinyl with a permanent adhesive on the reverse. The graphic is then laminated with a clear matt embossed PVC laminate, which is certified to R9 grade for slip resistance. These signs should be applied to sealed flat surfaces such as laminates, painted or varnished floors or whole tiles, and are suitable for dry indoor locations. A higher specification (R11) is suitable for outdoor conditions and is available on request, please ask for details. Floor Release paper Vinyl Laminate Please note: We recommend that you test the suitability of this product before use and that a regular check is made on all floor graphics. Worn, torn or otherwise damaged floor graphics should be removed and replaced.* *We cannot accept any responsibility for accidents to persons or damaged caused by the use of these products. FLOOR MARKINGS CONTACT US TO SEE HOW WE CAN CREATE BESPOKE SAFETY SIGNS TO SUIT YOUR NEEDS. Floor graphics and markings provide safety, informational or directional information at specific locations, often in areas where there is not always an appropriate place to site a standard sign. Application and Use 1) Locate the area where the graphic is to be placed, ensure the surface is suitable for the graphic as rough or porous surfaces are not suitable. 2) Clean the surface if required, it should be a sealed flat surface, clean from dust, oils or other contaminates. 3) Check that the graphic is centred properly and facing the correct direction (if applicable). Peel off a small strip of the release paper and stick it down to the surface. 4) Gently pull away the rest of the release paper, closely following this removal by pushing the floor graphic down, using a soft flat tool wipe from side to side to ensure no bubbles are trapped underneath the graphic. 105
RkJQdWJsaXNoZXIy Mzk5NjQ=