206 Lockout Tagout Electrical Lockout This universal MCB lockout has been designed to fit almost any size of MCB, regardless of size or the position of the holes on the breaker. Simply turn off the breaker and place the lockout over the switch. Use the thumbscrew to tighten the internal grub screw onto the switch, locking the unit into place. The thumbscrew will then fold down on its integral hinge, allowing a padlock to be fitted preventing access to the thumbscrew. Universal Mini Circuit Breaker Lockout Clamp Size Code 10 x 20mm LOK043 Our smallest MCB toggle is easy to use - simply place over the breaker and tighten the internal grub screw. Once secure fit a padlock or appropriate hasp through the hole to prevent unauthorised removal. Maximum clamping size ≤ 6mm. Universal Mini MCB Lockout Clamp Size Code ≤ 6mm LOK161 This MCB lockout device utilises a thumb-screw for easy ‘no tools’ installation and is suitable for use on virtually all ISO/DIN circuit breakers. It can be fitted vertically or horizontally, and is small enough to be used side by side on adjacent breakers. Simply lift up the cover and fit the unit onto the MCB toggle when in the OFF position, screw down the thumbscrew tight and close the cover, locking out the unit with a padlock. The device also has two locking options providing flexibility when applying a padlock either vertically or horizontally. Universal ‘Tool Free’ MCB Clamp Size Code 8 x 15mm LOK277 We have a range of lockout devices designed to be used to lockout modern workplace equipment. These are usually fixed to the power control switch of the electrical equipment, and when used with the appropriate tag and padlock are an effective way to ensure the equipment cannot be activated until safe to do so.
RkJQdWJsaXNoZXIy Mzk5NjQ=