208 Lockout Tagout Designed for 3 phase breakers, this large lockout fits over the switch and then the screw is tightened using the clock style section. When tight the clock section is locked to the main body through a sliding section fitted to the main body. Will accept 3 separate padlocks with a shackle diameter up to 8mm. 3 Phase Circuit Breakers Lockout Clamp Size Code 77 x 25mm LOK055 Fitted using an internal grub screw, the universal fuse lockout is suitable for use on fuse holders from 20 Amp to 400 Amp, manufactured from nylon. Maximum clamping size ≤ 5mm. Fuse Lockout Clamp Size Code 5 x 9mm LOK140 Dimensions (A) 93mm (B) 20mm (C) 30mm (D) 8mm (E) 78mm A B C D E Fitted using an internal grub screw, this universal lockout is suitable for larger circuit breakers and can be fitted to toggles ≤ 35mm in depth and 40mm wide. Large MCB Lockout Clamp Size Code ≤ 35mm x 40mm LOK142 D E A C B Dimensions (A) 40mm (B) 22mm (C) 40mm (D) 8mm (E) 47mm A B C D E Dimensions (A) 29mm (B) 6mm (C) 19mm (D) 9mm (E) 10mm For use on medium sized circuit breakers, turn the circuit breaker into the off position and place the lockout over the toggle switch. Tighten the screw thread until tight to the toggle with the integral pedal sitting into the housing of the breaker to prevent removal. Maximum toggle width: 20mm Medium Circuit Breaker Lockout Description Code With Pedal LOK209 Dimensions (A) (B) (C) 45mm 39mm 8mm C A B With Pedal
RkJQdWJsaXNoZXIy Mzk5NjQ=