233 Tagging Systems Ladder Tagging System The AssetTag holder should be permanently fixed to the ladder in a suitable safe place. Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag. If the ladder fails the inspection remove insert and inform a supervisor. Description Qty Code Single Insert 1 TG04-1 Pack of 10 Inserts 10 TG0410 Pack of 50 Inserts 50 TG0450 Kit 1 Holder, 2 Inserts, 1 Pen TG04KIT Box 10 Holder, 10 Inserts, 1 Pen TG04BOX AssetTag 5 TGOT5 The Work at Height Regulations came into force in 2005. These regulations apply to work at height where there is a risk of fall liable to cause personal injury. This applies to both internal and external work at height, and includes below ground level and low height. All ladders should be checked daily and prior to use for any damage, faults or wear and tear. In addition they should be inspected at defined intervals as part of a risk assessment programme. Use these inserts to manage the, safety and maintenance of ladders and help conform to the Work at Height Regulations 2005. AssetTag 55 x 210 x 6mm TGOT5 CONSIDER USING A LADDER LOCKOUT, SEE PAGE 195 FOR MORE DETAILS. Ladder Tag 50 x 181mm Polypropylene TG04-1 10 Holders 10 Inserts 1 Pens TG04BOX
RkJQdWJsaXNoZXIy Mzk5NjQ=