200 Lockout Tagout A simple solution for isolating gate valves. Once the valve is in the appropriate position, simply slip the lockout over the top of the handle, rotating freely around the valve stem and thus preventing access and movement of the valve. The different sizes cover the most commonly used valve diameters. Where a gate valve lockout cannot be used due to fitting or other restraints, consider using a cable lockout system to isolate the valve • Resistant to cracking and abrasion • Dielectric properties • Rotates freely around valve handles • Resistant to extreme temperatures • Suitable for hasps and padlocks • Available in various sizes Gate Valve Lockout USING A GATE VALVE LOCKOUT Slip the Lockout over the top of the valve handle. Once in position the cover will rotate freely thereby preventing the valve from turning. DIRECTIONS FOR USE: STEP 1 Ensure the valve is in the required locked off position (on/off). Select the appropriate sized lockout for the gate valve. STEP 2 Place the lockout device over the valve wheel and close, ensuring it can rotate freely around the wheel. STEP 3 Secure Lockout with a safety padlock and attach a tag to communicate your chosen safety message. Use a hasp if more padlocks are required. Keeping your workplace tidy. Keep your lockout tagout equipment easily accessible FIND THE FULL RANGE OF LOCKOUT STATIONS ON PAGE 214 STEP 1b (Optional) Optional clip out centre. Please specify if you would like the lockout with pop out centre when placing your order. (For use on valves with a rising stem).
RkJQdWJsaXNoZXIy Mzk5NjQ=