201 Lockout Tagout Two separate pieces which slide over the valve and lock together. Fits valve hand wheels between 25.5mm and 165mm in diameter. Adjustable Gate Valve Lockout Millimetres Inches Code 25.5 - 165mm 1” - 61/2” LOK006 Comprising of two flattened half moons with a hollow centre. Hinged at one side, they are placed over the valve and then closed, ensuring that the valve wheel is tamper-proof. Use a hasp if more than one padlock is required to Lockout the device. Please ask if you require the gate valve lockout with a clip out centre. Gate Valve Lockout Millimetres Inches Code 25 - 63.5mm 1” - 21/2” LOK001 63.5 - 127mm 21/2” - 5” LOK002 127 - 165mm 5” - 61/2” LOK003 165 - 254mm 61/2” - 10” LOK004 254 - 355mm 10” - 14” LOK005 Dimensions (A) (B) (C) (D) (E) 25 - 63.5mm 70 32 76 38 N/A 63.5 - 127mm 130 34 140 44 33 127 - 165mm 170 41 177 50 53 165 - 254mm 257 50 267 63 70 254 - 355mm 355 63 368 74 74 (A) Inside diameter (B) Inside depth (C) Outside diameter (D) Outside depth (E) Inner hole diameter C A E B D Our largest sized Gate Valve Lockout is suitable for valve handles with a diameter of 330mm up to 450mm. It has an integral clip out centre and a built in facility to use up to 4 padlocks without the need for a hasp. When not in use one side of the lockout fits within the other for transportation and storage. Extra Large Gate Valve Lockout Millimetres Inches Code 330 - 450mm 13” - 18” LOK204 Dimensions (A) (B) (C) (D) (E) 330 - 450mm 470 75 475 90 90 (A) Inside diameter (B) Inside depth (C) Outside diameter (D) Outside depth (E) Inner hole diameter All sizes in millimetres C A E B D
RkJQdWJsaXNoZXIy Mzk5NjQ=