211 Lockout Tagout Manufactured from glass resin polycarbonate, these lockouts permanently fit over the stem of the button and adhere to the back panel. Available in two sizes, they can be locked out using our standard padlocks or a suitable hasp. Designed to encapsulate standard push buttons, this lockout comes with a locking cap to ensure the enclosure cannot be removed without fully removing the padlock. Small: 75mm diameter by 40mm high, with a 30mm hole to sit around the foot of the button. Large: 70mm diameter by 80mm high, with a 30mm hole to sit around the foot of the button. Button Lockout Push Button Lockout Hole Diameter Code 22mm LOK193 30mm LOK194 Size Code Small LOK125 Large LOK126 Dimensions Size 22mm 30mm (A) Dia. 46mm 46mm (B) Inner circle dia. 22mm 30mm (C) height 31mm 31mm (D) Inner width 44mm 44mm # of holes 1 1 A B C D Description Code Button Lockout LOK187 This lockout unit fits around the stem of a button which can then be locked out using up to two standard padlocks. Manufactured from glass resin polycarbonate. Hole diameter of 22 - 30mm Button Lockout STEP 1 STEP 2 STEP 3 Dimensions (A) (B) (C) (D) (E) (F) (G) 50mm 8mm 18mm 35mm 50mm 33mm 22mm A C D E G F B
RkJQdWJsaXNoZXIy Mzk5NjQ=